气模产品的种类及样式非常的多，同时，气模厂也会根据用户的要求，定制及提供不同的气模产品，满足广大用户对气模产品的要求。然而，在应用气模产品时，也会出现各种各样的问题，为了不影响正常使用，用户则需要针对不同的问题，采取相应的处理方法。针对这一情况，气模厂将总结一些气模常见问题及处理方法。
There are many types and styles of gas mold products, and gas mold factories also customize and provide different gas mold products according to user requirements to meet the demands of a wide range of users. However, various problems may arise when using pneumatic products. In order to avoid affecting normal use, users need to adopt corresponding solutions for different problems. In response to this situation, the gas mold factory will summarize some common problems and solutions for gas molds.
1、气模漏气，如果是一般手指头大的小孔，或被小钉子扎了个小洞，只要鼓风机能吹起来，不影响气模的美观，都可以使用，就不需要更换，只要小修小补就可以。如果破了20厘米以上的口子，或中间少了一大块布。这时鼓风机一般吹不起来，会影响气模的效果。救急简单的办法就是用家里的手工针，像缝衣服那样，一针一针的缝结实，只要能把拱门吹起来就可以。
1. If there is a leak in the air mold, such as a small hole the size of a typical finger or a small hole pierced by a small nail, as long as the blower can blow it up without affecting the appearance of the air mold, it can be used without the need for replacement. Only minor repairs are needed. If there is a hole of more than 20 centimeters or a large piece of cloth missing in the middle. At this time, the blower generally cannot blow, which will affect the effect of the air mold. A simple way to save an emergency is to use a handmade needle at home, like sewing clothes, sewing one stitch at a time firmly, as long as it can blow up the arch.
2、美化处翘边，用小刷子在充气拱门翘边处涂抹适量胶水，稍停后压平压紧，粘贴牢固即可。
2. Beautify the raised edges, use a small brush to apply an appropriate amount of glue to the raised edges of the inflatable arch, pause for a moment, flatten and press it firmly, and stick it firmly.
3、脱胶，充气拱门脱胶部分易磨损部位长时间使用后易脱胶，可用布料剪成不同的造型在脱胶处粘贴即可。
3. Degumming, the easily worn parts of the inflatable arch that are prone to debonding after long-term use can be cut into different shapes of fabric and pasted at the debonding area.
4、漏气量大，充气拱门长时间使用后，因部分部位针孔线缝拉大，漏气量大增，可考虑用布条粘贴于接缝处，减少漏气量，如玩具过于陈旧，应考虑报废，以防经营中出问题。
4. There is a large amount of air leakage. After prolonged use, the inflatable arch may experience increased air leakage due to enlarged needle holes and seams in some areas. It is recommended to use cloth strips to stick them to the seams to reduce air leakage. If the toy is too old, it should be considered for disposal to prevent problems during operation.
如果您在使用气模产品时，也出现类似的情况，也可以参考以上的方法进行处理解决，使气模产品恢复正常使用。当然，如果出现其它问题，也不知道怎样处理解决，可以找专业的人处理。如果您需要重新更换气模产品，可以直接拨打我公司联系，我公司将根据您的要求，定制及提供符合您要求的气模产品。
If you encounter a similar situation while using a gas mold product, you can also refer to the above methods for handling and solving it to restore normal use of the gas mold product. Of course, if there are other problems and you don't know how to handle them, you can seek professional help. If you need to replace the air mold product, you can directly call our company to contact us. Our company will customize and provide air mold products that meet your requirements.
This article is contributed by the inflatable fake target friendship For more related knowledge, please click http://www.csdssc.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
山东三所新材料技术有限公司
分类中心
